Hello there crafters! Today is a fun day as it marks the debut of the Picket Fence Studios Kit called “Let The Good Times Roll Shaker Card Kit”. It is all about cocktails, shakers, and of course, good times and I have three cards to share with you to celebrate it’s arrival.

This is a periodic kit release – there is no set schedule for when additional kits may appear but there will be more in the future. The dies and stamps in the kit will be exclusive to the kit for 6 months and there is a limited supply. The value of the kit is $150 but you can purchase it for $49.99. So, if you like the kit, you may want to pick it up sooner rather than later!
This post contains affiliate links to some products. Please see my Disclosure And Copyright Page
Let The Good Times Roll Shaker Card Kit contains seven shaker drinks dies, two sentiment stamp sets, some patterned paper, clear and coloured acetate, lots and lots of super cute sequins, Shaker Garnish, some twine and some black and white foam sheets.
So let’s get into the cards and here they are! No suprise I guess for those that visit me regularly here on my blog, but I went pretty tropical and bright!

Let The Good Times Roll
For this first card I used the Tropical Cocktail die from the kit as the featured drink. I thought it would be fun to do an airy, wispy alcohol ink background which you can also see through the glass itself and I thought it looked just like a tropical drink swooshing around inside.

I took some white yupo paper and added a small amount of Alcohol Blending Solution onto the panel. A few drops of Ember, Sunshine Yellow and Botanical Alcohol Inks were then added on top of the blending solution. I used an air blower to blow the ink around, adding a few drops of extra ink in here and there and left it to dry. Once dried, I trimmed it down, added it onto a gold cardstock panel and then onto a top folding 110lb base card.
Next, I die cut the glass twice from 110lb white cardstock and adhered a small piece of acetate in between both layers using Precision Glue. I cut a narrow strip of the white foam sheet and added it around the underside edge of the glass. The drinking straw was cut from gold glitter cardstock for an extra touch of bling! I then put four different types of sequins onto the panel and secured the glass down over the top (inserting the straw before securing it down completely). My sentiment is from a digital file so it may not be representative of the true size of the stamp in the sentiment set but the words are the same. I popped all three sections of my sentiment up with black foam tape. I really like that you don’t see white foam tape behind the black sentiment. I don’t think I have ever had black foam tape, so this is a revelation for me!
Happy Birthday, My Friend
For this card I used the Martini Shaker die and I stacked it up to form a really deep dimensional die cut. I’m talking a lot of layers here!

For this card, to start off, I watercoloured my background by taking some Arches Cold Pressed paper and securing it down onto my clipboard with low tack tape. I used a flat brush and added a generous coat of clean clear water and then I applied rainbow coloured paint all the way down. To get the depth, I did two layers and then I took a small brush and added some silver splatters across the panel. I left it to dry before trimming it out and adding it to a top folding note card using white foam sheet. The Gansai Tambi colours I used were 36, 33, 43, 51, 63, 139 and 95.
For the martini glass, I die cut 10 layers of white cardstock and adhered them all together making sure to sandwich the acetate between the first and second die cut. I then cut the drinks stirrer from white glitter cardstock, and the two cherries from HA Cherry cardstock and SSS Dark Chocolate cardstock. They were glued together and a little gel pen added for some extra detail and then I set them to one side.
I took the ice cube sequin mix (so fun!) and laid a load of them down over the rainbow panel and then I popped the drinks mixer in before securing the glass down over the top using wet adhesive. The cherries were added to the outside of the glass also with wet adhesive. To make sure the drink was well and truly stuck onto the watercoloured panel, I put a few acrylic blocks on it whilst it dried. The sentiment is again from a digital file and this was added with black foam tape.
Happy Birthday, Bottoms Up!
My final card uses the Margarita Shaker die. I love a margarita, but I’ve not had one in ages, so I must rectify that!

For this card I began by adding some Stick It Adhesive to a small panel of 80lb white cardstock. Next I added a few coloured strips which I had cut from Concord & 9th Assorted Cardstock. The stripey panel was added onto a trimmed down white panel which I had matted onto Hero Arts Pitch Black cardstock and then onto a top folding note card.
The margarita die was cut a few times from white cardstock and once from silver glitter cardstock. The drinks mixer was cut from Pitch Black cardstock and the lime and lemon were from the same pack of Concord & 9th Assorted Cardstock.
The process for creating the shaker was the same as before. I just sandwiched the acetate between the top two layers and then added foam tape around the underside edge. A selection of yellow and green sequins, plus some green Shaker Garnish were added onto the panel and then it was placed down on top securing the mix inside. I finished by adding a sentiment from the stamp set and this was popped up with black foam tape.
Supplies
For your reference, I have provided links below to all the products that I use in this project. Affiliate links may be used on some products. All that means is that if you make a purchase after clicking on my link, I will receive a small commission. This is at no extra cost to you and I appreciate your support when using these links. To shop at your favourite store, click on your chosen logo.
This is a super kit – the dies that I didn’t use cut a whisky glass, a craft beer glass, a lemonade glass and a tropical pineapple! So there is pretty much a drink in there for everyone. Thank you so much for stopping by today, I hope that this gives you some inspiration if you purchase the kit.
Until next time, happy crafting!
What fabulous cards from a fabulous kit – that’s an amazing price for all of that! Been ages since I made a shaker, but the designs are perfect for cocktails – shaken not stirred. Bright and bold and summery is what we need right now xx
I love these so much!! Will be making them when I get my kit!You guys are the best!! Thank you for your inspired stamps and ideas!
These are so fun, Lisa! I love the bright, tropical feel to them. The colours work perfectly and so cool that you have coordinated them with the drinks. Love the added touches of glitter paper. These cards are definitely making me want a cocktail now! Haha! xx