Hello friends, today I have something a bit different to share with you. Not different for many people but definitely for me. I have two tags to show you! I am notoriously bad at making tags. I find it really difficult for some reason. I think just seeing a limited space sets me into a complete state of “blank”. So I have challenged myself. Last month, Spellbinders bought out some new tools and I asked if I could have the 3-In-1 Tag Punch. Why? Why? Why? Well, I thought it was a nifty idea for a punch and I had forgotten how difficult I find it to make tags! A moment of madness? Or maybe something I might use more of…. let’s find out!
So, here we are. I am REALLY pleased with how they came out. They took me a while though!

This post contains affiliate links to some products. Please see my Disclosure And Copyright Page.
The 3-in-1 Tag Punch cuts three sizes of tags. You can cut widths of 1.5″, 2″ and 2.5″ and they can be any length you like. It’s a clever punch! I made cards with the two largest sizes today.
Tag 1 – Merry Christmas
My first tag uses the 2.5″ width tag and I paired it with a beautiful poinsettia set that came out last year. I went for traditional red and green and whoever gets given this tag on a present this year had better not throw it out or they will be “unfriended” or “unfamilied”! Haha!
Main Supplies Used On This Card
- Spellbinders 3-in-1 Tag Punch
- Spellbinders Guillotine Paper Trimmer
- Spellbinders Christmas Bird Poinsettia Etched Dies
- Spellbinders Comfort & Joy Sentiments Hot Foil Plate and Die Set
- Spellbinders Gold Mix Color Essential Gems
- Spellbinders Champagne Glimmer Hot Foil
- Spellbinders Glimmer Hot Foil System
- Spellbinders Platinum 6 Die Cutting Machine

I started off by punching two 2.5″ strips of 80lb white card. I put both to the side whilst I did my die cutting. The Christmas Bird Poinsettia Etched Dies was my set of choice and I die cut the poinsettia, candy cane and foliage using Crimson, Poppy Field, Rainforest and Peridot Color Essentials Cardstock. I also used some 80lb white card for the base of the candy cane. I adhered the red pieces for the candy cane onto the white base using Bearly Art Glue. Next I adhered both the crimson and poppy field poinsettia die cuts together, offset, so that the poinsettia is nice and full!

I put some foam tape onto the back of the poinsettia (in the centre) and doubled it up, so it had lots of height for me to tuck things under. The candy cane was then added with just one layer of foam tape and I then adhered all the foliage with wet adhesive.

The sentiment comes from Comfort & Joy Sentiments Hot Foil Plate and Die Set. It was foiled onto white card using Champagne Glimmer Hot Foil and the Glimmer Hot Foil System. I cut it out with the coordinating die and just adhered it across the poinsettia with Bearly Art Glue. I then added some Gold Mix Color Essential Gems into the centre of the flower and around the rest of the tag.

To finish, I trimmed some of the length off the bottom of the tag using the new Guillotine Paper Trimmer. I then adhered the second tag piece behind it for stability and trimmed that to the same length. I found some white ribbon in my stash to thread through the hole at the top.
Tag 2 – Joyeux Noel
For this tag, I used the 2″ width setting and thought I would add a sweet little penguin on top!
Main Supplies Used On This Card
- Spellbinders 3-in-1 Tag Punch
- Spellbinders Guillotine Paper Trimmer
- Spellbinders Dancin’ Penguin Etched Dies
- Spellbinders Tiny Dots Embossing Folder
- Spellbinders Christmas Blooms Etched Dies
- Spellbinders Silver Glimmer Hot Foil
- Spellbinders Glimmer Hot Foil System
- Spellbinders Platinum Die Cutting Machine

So, as before, I popped a 2″ wide piece of card into the tag punch, punched it and set it to one side. I repeated the process so that I have two which I will adhere together later so that the tag is nice and sturdy.
I then took the Dancin’ Penguin Etched Dies and cut all the different elements out of cardstock. I used Neenah 80lb white card, Spellbinders Onyx, Purple Mist, Barely Peach, Waterfall and Saffron Color Essentials Cardstock. I then cut the star and ice skates from Silver Glitter Cardstock and the hat trim and pom pom from the white glitter card in Spring Tones Glitter Cardstock. The holly and berries are from Christmas Blooms Etched Dies and the berries were cut from the red glitter card in Jewel Tones Glitter Cardstock and the holly was die cut from Peridot.

I assembled the penguin using Bearly Art Glue and set it to one side. I then took one of the tag punch pieces and ran it through my Platinum 6 Die Cutting Machine with the Tiny Dots Embossing Folder. I made sure to leave a section hanging outside of the folder as I wanted to foil a sentiment on that part. I then took a sentiment from Mini Christmas Sentiment Strips Glimmer Hot Foil Plate and Die Set (I think this is now retired sadly) and I foiled it with Silver Glimmer Hot Foil and the Glimmer Hot Foil System.

The penguin die set is an interactive set, so those little skating boots swing from side to side. To enable this, I popped a double sided foam circle onto my embossed tag and placed the skates die cut over it. The skates die cut has a circle section (you can’t see it as it’s behind the penguin) and this is where you place your bit of foam tape. Round foam tape works best as the circle is round. The circle opening allows the skates to swing back and forth!
I then added some more foam tape onto the back of the penguin, making sure none of it touches the circle of the skates die cut and placed it down. It has lots of dimension!

To finish, I trimmed some off the length of the tag and then adhered the second one to the back and cut that down to the same size as the other. I finished by adding some white ribbon through the hole at the top.
Supplies
In case you feel like doing a little shopping, I have listed the products I have used below. Some of them are affiliate links which means that I receive a small commission if you use one. This is at no extra cost to you and I very much appreciate your support of my crafting adventures. Thank you! To shop at your favourite store, click on your chosen logo.

So, there we have it! Definitely out of my comfort zone but I do think they turned out great in the end. What do you think? Maybe I have conquered my fear of tags. I’m not sure, but I will try to look at my supplies in a different way to see if they would work on a tag. You can always add a finished tag to a card which is a great design element – especially if you don’t think you will use the tag as a tag and would prefer a card instead!
Until next time, I hope that you have a wonderful weekend. Happy crafting!
aw, these are really sweet, and I start making Christmas stuff in July so it’s not such a rush at Christmas time, LOL