Hello there, today I have two cards to share using the Spellbinders 12 Days of Christmas Advent Calendar and Stitch Along Add-on Kit. I am playing with Day 5 of the kit today but I hope to have some time to play with the other days in the kit and I will share those here on my blog as and when. And it’s been a long long time since I made a video, but I do have one to share today which takes you through both of my cards. If you want to skip straight to the video, please scroll down.
So, here at the two cards that I have created using Day 5 which is a beautiful five point star shape. Of course this could be used all year round, not just for Christmas.

This post contains affiliate links to some products. Please see my Disclosure And Copyright Page.
One of my cards (on the right) uses just items from the Advent Calendar and the Stitch Along Add-on Kit. The card on the left uses some extra products to embellish the star even further. I have gone with a favourite colour palette of pink/red, gold, white and teal/aqua. The star stitching die has two layers; you get the larger base layer which has a pretty dot detail around the points and you also get five of the small stitching pieces. So there is not a huge amount of stitching to be done but the results are so pretty!
Main Supplies Used On These Cards
- Spellbinders 12 Days Of Stitchmas 2024 Advent Calendar
- Spellbinders 12 Days Of Stitchmas Stitch Along Add-on Kit
- Spellbinders Christmas Bird Poinsettia Etched Dies
- Spellbinders A Merry Little Christmas Sentiments Hot Foil Plate and Die Set
- Spellbinders Champagne Glimmer Hot Foil
- Spellbinders Glimmer Hot Foil System
- Spellbinders Platinum 6 Die Cutting Machine

Card 1 – Shine Bright
As I mentioned above, this card uses just uses the star and items from the stitch along kit. When stitching, more often than not, I cut two layers of each die to help with stability. If I use a heavier cardstock, I sometimes go with just one piece. The white card I used on this card is Snowdrift and it is a heavier cardstock and is 110lb weight. I did however in this instance cut two of each stitching piece and two of the base layer. I adhered the pieces together with Bearly Art Glue.
I then stitched each piece using the Gold Diamant thread included in the kit and I doubled up the thread so that it would have more impact. The ends of the thread were secured behind the pieces with tiny bits of Best Ever Craft Tape. If you struggle with the size of the stitching pieces, you can always hold the piece with some tweezers and stitch it. Once I had finished the stitching, I simply glued the five stitched points onto the star base and set it to one side.

I then took a piece of printer paper and added some double sided adhesive tape to it. Using cardstock from the kit I cut strips of an eight of an inch from Snowdrift, Poppy Field, Teal Topaz and gold. They were then added onto the printer paper. I cut an A2 panel of Snowdrift cardstock down slightly and adhered the striped piece. I trimmed off any excess from the sides and then added the whole panel onto a Snowdrift card base (11″ x 4.25″, scored at 5.5″) using thin foam tape.
The star was then added on top using Bearly Art Glue.

Included within the stitch along kit is a clear stamp set. I took the “shine bright” sentiment and stamped it onto the Poppy Field card using Versamark Ink. Next I applied white embossing powder and heat set before trimming it down with a paper trimmer. It was added across my star using some thin foam tape.

To finish the card I added some white pearls from the kit.
Card 2 – Season’s Greetings
For this card, I went with variegated thread for my stitching and I embellished the star using some foliage. I also did a little foiling for the sentiment.

This time I die cut my star base layer twice from gold mirror card and as I did before, I die cut the stitching pieces twice from white card. I used the pink/red thread from the kit for my stitching. I just love how you see the variation in colour as your eyes travel around the star.
Once I had finished the stitching, I added my star points onto the base using Bearly Art Glue and set it to the side.

My foliage all comes from the Christmas Bird Poinsettia Etched Dies and it was cut from Snowdrift, Waterfall and Teal Topaz . I popped some foam tape onto the back of the star and then added it onto an A2 panel of white card. The foliage was gradually adhered behind using Bearly Art Glue.

For my sentiments, I used two plates from A Merry Little Christmas Sentiments Hot Foil Plate and Die Set. They were foiled using Champagne Glimmer Hot Foil and the Glimmer Hot Foil System and then cut out using the coordinating dies. I also added some foam tape onto the back of these before adhering them onto my panel.

To finish, I added some Gold Mix Color Essentials Gems onto the star and amongst the foliage.
Video
Here is the video showing the process for both cards. You can also watch this video on YouTube here.
Supplies
In case you feel like doing a little shopping, I have listed the products I have used below. Some of them are affiliate links which means that I receive a small commission if you use one. This is at no extra cost to you and I very much appreciate your support of my crafting adventures. Thank you! To shop at your favourite store, click on your chosen logo.
I hope that you have enjoyed seeing my cards using Day 5 of the 12 Days Of Stitchmas Advent Calendar. If you want to see more inspiration with the Advent Calendar, head over to the Spellbinders Blog. I will be back soon with more for you, but in the meantime I hope that you have a great day!
Your cards are absolutely stunning my friend, well done
Beautiful cards, Lisa! I love the colour combo you used on both cards and that star die is fab! Could definitely be used all year round! Both cards are great but I particularly like the second one with the foliage – so pretty! Really enjoyed the video too! xx