Hi friends, it’s officially Christmas in July! Spellbinders Clubs release to new subscribers on the 6th of the month and in my mind that means it’s the start of that wonderful time of year when all the fabulous Christmas sets start to hit the stores. This month’s clubs at Spellbinders won’t disappoint. Do they ever? We are in full on Christmas mode and I have a dancin’ Santa card for you.

This post contains affiliate links to some products. Please see my Disclosure And Copyright Page.
The Large Die of the Month subscription features a Santa, an Elf and a Christmas tree. When assembled, the tree sits to the side of the card and you can pop the Santa and Elf behind it, as if they were waving hello to you. Fun right? If that doesn’t float your boat, you can add legs to them and have them “dancin'”. The legs move from side to side when you tilt the card. I went with the dancin’ option as an interactive card is always fun to make and even better to receive.
I started off by die cutting the tree and baubles. I cut the tree from Rainforest and Peridot ColorWheel Cardstock and the baubles from Peridot, Pomegranate and Seaside ColorWheel Cardstock. The bauble strings were die cut from the Brushed Metallic Cardstock in Gold Assortment Treasured Cardstock. I glued the ornaments onto the strings and set everything to one side whilst I made Santa.

I made a few mistakes when I made Santa’s face. (I was still a bit excited after watching England beat Mexico in the World Cup!) However, I got there in the end. He was die cut from Poppy, Chiffon, Coral and Raven ColorWheel Cardstock as well as 80lb white card. I assembled him using Bearly Art Glue but left the legs section unattached.
You do have to pay attention to the order in which you assemble Santa though, especially his face. You have to make sure you adhere the beard onto his face before the moustache, then his nose, cheeks, eyes and eyebrows. You can then adhere the whole body onto the hat. The rest is pretty simple, just make sure you also add the mittens and boots before you pop on their white trims.

I took a panel of Waterfall ColorWheel Cardstock and adhered the three tree sections down the left hand side. I then put the panel into my Splat Box. Using a no.2 round brush, I splattered Spellbinders Splatter White Opaque Watercolour over the trees and background. Next, I die cut a frame from 80lb white cardstock using the Essential Arches Etched Dies and I adhered that onto the panel using liquid adhesive.
Back to poor Santa who is currently without the lower part of his body! In the photo above, you can see that his feet don’t touch the bottom of the card. That is because the die cut moves around. The photo below has them touching the bottom! The legs die cut has a circular hole cut into it at the top. All you need to do is line up the die cut with your background panel (where you want his legs to swing) and then pop a circular foam dot into that circle hole. This enables the legs to swing freely. Then you pop the body on top with foam tape. You do need to remember to not put any foam tape behind the body that will prevent the legs swinging (i.e. not on the legs die cut). So be careful there but the Spellbinders dancin’ range is really simple once you get the hang of it.

After I had popped the legs in place and then his body, I heat embossed a sentiment from Snowflake Wishes Clear Stamp Set. I stamped the greeting onto Raven ColorWheel Cardstock using Versamark Ink and then I applied Hero Arts White Detail Embossing Powder. I heat set it and cut it out with the banner die included in the set. It was added using some thin foam tape.
I finished by adhering some snowflakes from Frozen Flurries Etched Dies and then adding a Silver Mix Color Essential Gem into the middle of them. The finished panel was then glued onto a top folding A2 heavyweight white note card.
If I hadn’t been so excited about the England win and also slightly delirious from getting up at 6.30am to watch the recording… this would have been fairly quick to pull together! There are lots of ways to use the set this month. You don’t have to include the tree at all and just have the dancin’ Santa and dancin’ Elf as your focal points. Whatever you end up making, you are sure to have fun doing it!
Thanks so much for your visit today. I really appreciate you stopping by. Have a great day!
Supplies
In case you feel like doing a little shopping, I have listed the products I have used below. Some of them are affiliate links which means that I receive a small commission if you shop using my links. This is at no extra cost to you and I very much appreciate your support of my crafting adventures. Thank you! Some items have been very kindly sent to me to use and those are marked with an asterisk. To shop at your favourite store, click on your chosen logo.
Such a wonderful. card.
Love the layers and details to the Christmas tree.
Merry Hugs
aw, he is so sweet, and I love that you added the arch window it gives it so much definition